Between two floors of ground concrete, On vibrating floors, On the floors of buildings are using area for this board. Floating floor panel is a bare stone wool plate produced for areas that require compressive strength and require load bearing, sound insulation, vibration and fire resistance. Floating floor panel is used for the floors of the buildings, floors between floors and under the vibration source base for the purpose of heat, sound and vibration insulation.
Panel placed on the floor are bonded to the lateral walls of the floor up to the height of the leveling concrete to prevent vibration transfer. Before the trowel coating is poured, it should be covered with a polyethylene fabric. When it is supported with wire and reinforcements (PP fiber), a layer without shrinking cracks will be obtained. Then the application is completed by covering the desired flooring material. This panel used Between two flats, under the concrete, Under the source of vibration, Floor coverings in flats and buildings.
• Stretch the canvas even when hey are shipped for short distances
• It should be stored in the package and the damaged package should not be used.
• Packages should not be stacked on top of each other
• The products are not be stepped on or used as a step.
• The products are not be stepped on or used as a step.
• Storage area should be closed to prevent leakage during rain, flooding etc.
• The storage floor must be flat and non-slippery
• It should be done in closed areas in rainy weather.
Mevlana Mah. Şehit Fuat Vurgan sok. Prestij life Apt. No 25 Kat 3 D:20 Talas Kayseri, TURKIYE